CWB magnetic drive pump (referred to as magnetic pump) is a new product which applies the working principle of permanent magnetic coupling to centrifugal pump. It has the characteristics of reasonable design, advanced technology, full sealing, no leakage, low flow, high lift and corrosion resistance. Its performance has reached the advanced level of foreign similar products.
The magnetic pump replaces the dynamic seal with the static seal, which makes the flow passage parts of the pump in a completely sealed state, and completely solves the unavoidable problems of running, emitting and dripping of other pump mechanical seals. The magnetic pump is made of stainless steel and other materials, so it has good corrosion resistance and can protect the transported medium from pollution.
It is suitable for conveying large pressure of 1.6Mpa, temperature of no more than 120 ℃ and viscosity of no more than 30 ℃ × 10-6m2
/ s liquid without ferromagnetic particles and fibers. When the pressure of the conveying medium system is more than 1.6Mpa, the temperature is more than 120 ℃, and the supporting insulation measures are needed, the unit can carry out special design and manufacture.
Performance range: (rated point)
1. Flow: 0.36 ~ 14.4m3
2. Lift: 30 ~ 210m
3. Pressure: 0 ~ 1.6Mpa (customized ~ 42MPa)
4. Temperature: 0 ~ 100 ℃
5. Speed: 2900r / min
① It is a new generation of vortex pump with the characteristics of magnetic pump and vortex pump;
② Small flow, large head and low specific speed;
③ Compared with volume pump and multi-stage centrifugal pump, it has the advantages of small volume, light weight and simple structure;
④ Compact structure, beautiful appearance, small volume, low noise, reliable operation, convenient use and maintenance.
It can be widely used in chemical, pharmaceutical, petroleum, pumping acid, lye, oil, rare and precious liquid, venom, volatile liquid, circulating water equipment and filter. Especially for the pumping of leaky, flammable and explosive liquid, this pump is ideal.