BM series magnetic pump

Model: BM
Material: select and configure according to needs
Application: suitable for conveying large pressure 1.6Mpa, temperature no more than 120 ℃, viscosity no more than 30 ℃ × 10-6 ㎡ / s liquid without ferromagnetic particles and fibers.

BME series magnetic pump

Model: BME
Material: rotate and customize as needed
Application: suitable for conveying large pressure 1.6Mpa, temperature no more than 120 ℃, viscosity no more than 30 ℃ × 10-6 ㎡ / s liquid without ferromagnetic particles and fibers.

BM-B series jacket insulation magnetic pump

Model: BM-B
Material: stainless steel
Purpose: strong magnetic and high temperature resistant materials and unique design of incubator are used to ensure that the medium will not condense in the process of conveying medium, and when the temperature is too high, the extra temperature can be taken away by cooling water in the incubator. It can transport flammable, explosive, highly toxic and precious liquids.

Particle magnetic pump BMO series

Model: BMO
Material: select and configure according to needs
Purpose: to provide pumping solutions for harsh fluid transportation under various working conditions. It is a kind of magnetic drive pump suitable for conveying solid particles.

BMQ series magnetic drive tangent flow pump

Model: BMQ
Material: stainless steel
Purpose: BMQ magnetic drive tangent flow pump is a kind of non leakage centrifugal pump with small flow, high head and high speed.

BMQG series impurity type vertical magnetic drive centrifugal pump

Model: BMGQ
Material: stainless steel
Application: bmqg series impurity type vertical magnetic drive centrifugal pump is a shaft seal free and completely leak free centrifugal pump developed by our company according to market demand. It belongs to a magnetic drive pump suitable for conveying solid impurities. It has the advantages of reasonable design, compact structure, small floor area, reliable performance, convenient use and maintenance, high efficiency and energy saving. It is allowed to pump 30% of the fluid with solid content. The design pressure is 4.0Mpa, the flow can reach 400m3, the lift can reach 300m, the diameter is 20 ~ 300mm, the working temperature is 120 degrees, and the high temperature type can reach 320 degrees.

BMZ series self-priming magnetic pump

Model: BMZ
Material: select and configure as required
Usage: suitable for conveying large pressure of 1.6Mpa, temperature no more than 120 ℃, viscosity no more than 30 ℃ × 10-6 ㎡ / s, allowing to transport 5% liquid of particulate matter and fiber.

BM-G series high temperature magnetic pump

Model: BM-G
Material: stainless steel
Purpose: bm-g high temperature magnetic drive pump is used in petroleum refining, petrochemical and chemical industry and other places to transport special petroleum, printing and dyeing raw materials and high temperature medium (service temperature T < 300 ℃).

Fluorine-lined magnetic pump BMF series

Model: BMF
Material: metal lining
Purpose: fluorine lined magnetic pump is safe and reliable, low noise, no leakage, clean and safe process site, it is a real industrial environmental protection product. It is suitable for transporting chemical liquid with high purity and corrosiveness.

BMT series magnetic drive mixing equipment

Model: BMT
Material: stainless steel
Purpose: the magnetic driven mixing equipment has mature structure, maximum viscosity of 1200Mpa. S and power of 55kW. It is suitable for mixing or heating mixing at the same time. It is suitable for liquids or solid-liquid mixtures that are flammable, explosive, easy to leak, valuable, high pressure, high vacuum and not very viscous.

Rotor pump

Hydraulic diaphragm metering pump series

Tank type non-negative pressure pipe network pressurized steady flow water supply equipment

Chemical canned pump